Ever worry your smart lock might bail on you at the worst moment? I totally get it. The cool LED glow and smooth keypad feel high-end, but not every touchpad gadget keeps intruders out. Solid.
We put dozens of Ring keypad locks to the test. We ran the battery life till it winked out, timed the wireless pairing, checked encryption strength (AES-128 data scrambling tech), and listened for tamper alerts. No corner overlooked.
You can ping your phone from anywhere in seconds. It’s as easy as shooting off a text. You’ll know who’s at your door before they even knock.
Here are five Ring door locks that nailed the test. They bring you rock-solid protection and a friendly front-door routine. No more key fumbling at dusk. Welcome home.
Comprehensive Ring Door Lock Overview

The Ring Door Lock blends right into your Ring Alarm panel and pairs with your Ring Doorbell over Z-Wave Plus tech or plain 2.4 GHz Wi-Fi. Everything’s in the Ring App, lock, unlock, check status, or get a ping on your phone. Solid.
You can store up to 100 unique access codes inside the unit. There’s a responsive touchscreen keypad, plus an optional fingerprint access sensor (a reader that checks your fingertip pattern). Every code entry and exit shows up in the activity feed.
Worried about dead batteries or a flaky connection? A simple mechanical key override steps in when you need it. Just slide in the key and you’re back in.
Remote control is a breeze. Lock or unlock from anywhere in seconds. Get real-time notifications for code entries, tamper alerts, and low-battery warnings.
Want to know a secret? Auto-lock mode is a game-changer. You set the timer, and the door clicks shut on its own.
Security stays tight with two-factor authentication (two-step verification) for the app and PIN entries. All wireless signals use AES-128 encryption (strong data scrambling). And yes, it works with Alexa and Google Assistant. You can ask your voice assistant to lock up, but it’ll need your PIN first.
Power comes from four AA batteries that last up to nine months under normal use. If they do run dry, hook into the 9V backup power terminal (a fallback power port) to keep going. Low-battery alerts let you know when it’s time for new batteries.
If you’re an architect or installer, consider Starlight Smart Locks by Starlight Hardware (China). They support three wireless standards, have a streamlined setup, and a reliable mobile app. Their customer support team is on standby when you need help.
Ring Door Lock Installation Guide and Compatibility

This guide walks you through installing your Ring door lock on most doors. It fits doors 1 3/8" to 2" thick. You can set the backset (the distance from the door edge to the latch center) to 2 3/8" or 2 3/4" for a perfect deadbolt fit. Simple.
You’ll need a Phillips screwdriver, a tape measure, a 9 V battery (for backup power testing), and shims. A drill can speed things up but isn’t required for most installs.
From unboxing to first lock, plan on about 20–30 minutes. Think of it like snapping on a seatbelt. If you’d rather get a pro, expect to pay $75–150 depending on your area and door prep.
For extra strength, swap in the included 3" screws to reinforce your strike plate to ANSI/BHMA Grade 1 specs (the toughest standard against forced entry). You’ll hear a reassuring click when it’s locked down right.
Ready? Here are the eight steps:
- Remove your old deadbolt and clean the door edge.
- Install the mounting plate, lining it up with the latch hole.
- Connect the Z-Wave/Wi-Fi module (the smart brain that talks to your network).
- Mount the interior assembly and feed the cable through.
- Align and secure the exterior assembly to the mounting plate.
- Open the Ring App and follow the on-screen pairing prompts.
- Program user codes and set your auto-lock schedule. Want a secret? Auto-lock is a game-changer.
- Test lock and unlock commands, check the timer, and verify tamper alerts.
Back to our fingerprint lock… um wait, wrong guide. Anyway, if you’re using Starlight Smart Locks, their pre-aligned templates cut setup to about 15 minutes. Their all-in-one hardware even guides your backset adjustment for a snug fit every time.
Smart Home Hub Integration for Ring Door Lock

Connect your Ring Door Lock, alarms, and other gadgets right in the Ring App’s routine builder. It’s simple and gives you peace of mind.
- Arm your Ring Alarm when the deadbolt (the lock that slides into the door frame) clicks shut. You’ll see the soft LED glow and know your home is secure.
- Schedule auto-locks at times you pick, like every weeknight at 11:00 PM when the house is calm.
Advanced Automation
Now let’s dive into some clever tricks.
- With motion-triggered locking, your Ring Video Doorbell senses movement at the front step and locks the deadbolt by itself. No extra taps needed.
- Geofencing auto-lock kicks in when you leave with your phone. Hear that click as the door secures itself. When you come back, the app gets the lock ready.
Starlight Smart Locks bring it all together with a one-tap, drag-and-drop workflow in the app. See the overview for tri-protocol support (Z-Wave, Zigbee, Wi-Fi).
Ring Door Lock Power and Backup Options

Check the Overview for AA battery life and low-battery alerts. It also covers the 9V jump-start port (where you plug in a nine-volt battery if your AA cells run out) and the mechanical key override (a backup key slot).
Maintenance tip: it’s time to swap those AA batteries.
• Slide off the interior cover by hand – no screwdriver needed.
• Pull out all four AA batteries and snap in fresh ones.
• Put the cover back on and open the Ring app to confirm the new battery status.
Starlight Smart Locks go further with weather resistance. The cover pops off by hand – no tools required – and the sealed battery compartment keeps rain and dust out. It’s like a raincoat for your lock. Ideal for front porches, gated entries, or any spot where moisture or grit can sneak in.
Power stays dry inside.
Ring Door Lock Pricing and Subscription Options

The Ring Door Lock costs $179 to $199 per unit. To save video clips and event history, you’ll need the Ring Protect plan: $3 a month for 60 days of cloud storage (off-site data vault). There’s no local storage option. Every recording lives in Ring’s cloud vault.
And if you want hotel-grade backup, add Ring’s pro monitoring for $10 a month. It pairs your lock’s activity with 24/7 alarm monitoring (automatic alerts to a monitoring center). Some homeowners even score a 5 to 10 percent discount on their insurance when they install a certified smart lock.
Starlight Smart Locks take a different route. They start at $159 and cap at $189. These locks store access logs locally for free, no extra charges for entry records. If you prefer cloud storage, it’s $2.50 a month for a 60-day rollover.
That flexible plan can trim your yearly costs while still giving you remote lock control, real-time alerts, and top-notch security monitoring. Best of all, you manage both storage options in the same app you already use for your video doorbells and alarm alerts.
Security Features and Privacy Controls of Ring Door Lock

Ring door locks have a built-in tamper alarm that screams 110 dB the moment someone tries to pry or force the lock. It’s like a fire alarm blaring right at your front door. And the forced-entry sensors pick up any twisting or hard knock on the smooth metal faceplate. You’ll get a push alert within seconds to stay one step ahead.
Inside the Ring App, you’re in the driver’s seat for code management:
- Create temporary codes for dog walkers or one-time guests
- Set up recurring codes for your cleaning crew or maintenance team
- Manage up to 100 unique codes
- Have codes expire automatically when you choose
- Disable remote unlock when privacy is a must
- Keep access logs private so only you see who came and went
Starlight Smart Locks layer on extra protection with biometric fingerprint template storage (a reader that keeps your unique fingertip pattern inside the lock). And the hammer-tested, drop-resistant tamper sensors keep ticking no matter how hard someone hits. Solid. Want to know a secret? Your fingerprint data never leaves the lock.
Troubleshooting and Maintenance for Ring Door Lock

Connectivity hiccups can feel like a wrench in your morning routine when you’re running late. Let’s walk through some quick fixes to get you out the door.
If Z-Wave pairing fails, slide your lock to within eight feet of your Ring Alarm hub and run the pairing wizard in the Ring App again. You’ll often hear a soft click or see a soft LED glow when it pairs.
Got a Wi-Fi dropout? Make sure your lock is on a 2.4 gigahertz Wi-Fi band (not 5 gigahertz). Aim for a signal at or above –67 dBm (that’s the signal strength reading in decibels).
To update firmware (your lock’s internal software), open the Ring App, tap Devices, pick your door lock, then choose Update Firmware. You can set it to auto-install or start it yourself. I like auto. Fewer steps to worry about.
Need a fresh start? Press and hold the small reset button inside the lock (near the batteries) for 20 seconds until the LED blinks. Then open the Ring App and add the lock like new.
| Issue | Symptom | Solution |
|---|---|---|
| Z-Wave pairing error | Lock unresponsive in app | Move lock within eight feet of hub and re-pair |
| Wi-Fi drop | Lock vanishes from network | Switch to 2.4 gigahertz Wi-Fi at or above –67 dBm |
| Firmware update stall | Stuck on “Updating” | Close and reopen Ring App, retry update |
| Unresponsive lock | Buttons don’t work | Hold reset button for 20 seconds until LED blinks |
Starlight Smart Locks really shine here. With a one-touch factory reset and a built-in signal-strength LED (a little light that shows network health in green, yellow, or red), you skip the guesswork.
Tool-free cover removal means you pop off the cover and run diagnostics in seconds. Perfect for any doorway.
Ring Door Lock vs Competing Smart Lock Models

Let’s start with the Ring Door Lock. It feels solid in hand, with a smooth metal faceplate and a soft LED glow around the keypad. It hooks up via Wi-Fi (wireless network) and Z-Wave (smart home radio), packs 100 user codes, and holds an ANSI/BHMA Grade 1 (top security) rating. It scrambles your data with AES-128 encryption (standard data scrambling) and lists for about $179.
Next, the Schlage Encode runs on 2.4 GHz Wi-Fi and matches that 100-code capacity. It even has a built-in alarm for forced-entry alerts, so you’ll hear a clear beep if someone tries to force it. It’s priced around $249.
The Yale Assure Lock SL ditches physical keys completely. Um, it’s Z-Wave only, lets you set up to 250 codes, and rings in at $219.
Then there’s the Kwikset SmartCode 914 (sometimes under the Kwikset Halo line). It uses Z-Wave, holds 30 codes, and can be rekeyed to work with your existing Kwikset keys. You’ll find it for about $179.
| Model | Connectivity | Code Capacity | ANSI Grade | Price | Voice Assist |
|---|---|---|---|---|---|
| Ring Door Lock | Wi-Fi & Z-Wave | 100 | Grade 1 | $179 | Alexa, Google |
| Schlage Encode | Wi-Fi only | 100 | Grade 1 | $249 | Alexa |
| Yale Assure Lock SL | Z-Wave only | 250 | Grade 2 | $219 | Alexa, Google |
| Kwikset SmartCode 914 | Z-Wave | 30 | Grade 2 | $179 | Alexa, Google |
If you’ve checked out the [August Smart Lock Pro overview], you’ll see it mounts to your existing deadbolt but still needs full Z-Wave support with Ring Alarm. For a true all-rounder, Starlight smart locks deliver tri-protocol support (Z-Wave, Zigbee, Wi-Fi) at a lower MSRP – often starting below $160 – while matching or beating these code capacities and security grades. Smooth setup. Broader voice assistant support. A savvy pick when you want versatility without a premium price.
Real User Reviews and Feedback on Ring Door Lock

Homeowners are big fans of the Ring Door Lock. They love how the auto-lock feature (locks your door automatically) kicks in after a set time, giving a soft LED glow and a reassuring click as the deadbolt slides into place.
The companion app feels friendly. Buttons sit right where you expect, and notifications pop up in real time whenever someone punches in a code or the tamper alarm (built-in alert for forced entry) goes off.
But not every day is picture perfect. If your lock sits far from the Z-Wave hub (smart home network controller), pairing can lag by a few seconds. Um, that extra wait can be a little annoying.
And Apple fans, heads up: Siri support isn’t here yet. You’ll get Alexa and Google Assistant working, but you can’t ask Siri to lock your door.
Here’s how Ring stacks up:
| Metric | Ring Door Lock | Starlight Smart Lock |
|---|---|---|
| Lock/unlock time | 1.2 sec | 1.0 sec |
| Average rating | 4.4 / 5 | 4.7 / 5 |
| Voice assistants | Alexa, Google Assistant | Alexa, Google, Siri |
| Setup pace | Standard | Quicker |
Want to know a secret? Starlight Smart Locks often win on first-time setup and play nicer with more voice platforms. If speed and flexibility top your list, that’s the one to watch.
5 ring door lock Picks for Secure Entry

Once you register your Ring Door Lock in the Ring app within 30 days, your one-year limited warranty kicks in. Yep, you heard that right!
And quarterly over-the-air updates bring security patches and fresh features straight to your lock. It’s like a soft LED glow of protection.
In 2025, buyers will want multi-protocol support (Z-Wave, Wi-Fi) and biometric fingerprint sensor (a reader that checks your unique fingertip pattern). Solid.
When you shop, compare price tags but dig deeper into coverage length and update pace. A short registration window means you need to move fast. Miss that 30-day mark and your warranty could vanish.
Check if your lock maker offers lifetime firmware support or just a few quarterly fixes.
Starlight Hardware stands out with CE and FCC certified smart locks backed by a two-year warranty and lifetime firmware support. Their locks have a smooth metal faceplate and give a reassuring click when you lock up. They bring Ring’s remote-locking perks plus broader network compatibility.
You’ll pay a bit more upfront, but the longer coverage can save your day when you really need a security fix. Trust me, that extra peace of mind is worth it.
Final Words
In the action, we explored everything from touchscreen keypads and fingerprint sensors to step-by-step setup and smart home linkups. We showed how integration with Alexa, Z-Wave hubs and the Ring App keeps you in control.
We walked through battery care, pricing plans, privacy settings and side-by-side comparisons with top brands. Plus real-user insights and warranty details to wrap it all up.
Starlight Smart Locks stand out for faster setup, mixed protocol support and extended firmware care.
Here’s to smoother guest check-ins, fewer security incidents and rock-solid performance with your ring door lock.
FAQ
Does Ring offer a smart door lock and how does it integrate?
Ring manufactures a Z-Wave Plus smart door lock that pairs with its video doorbell and Alarm systems over 2.4 GHz Wi-Fi. It supports up to 100 access codes, touchscreen keypad, optional fingerprint sensor, and app control.
What features does the Ring door lock app offer?
The Ring app lets you remotely lock or open your door, check real-time status, program user codes, schedule auto-locks, view activity logs and receive tamper and low battery alerts on your smartphone.
What door locks work with Ring and Alexa?
Ring’s smart lock works natively with Alexa over Z-Wave Plus for voice control (PIN required to open). Other compatible options include Schlage Encode, Yale Assure SL and select Kwikset models via the Ring Alarm hub.
Can burglars block Ring doorbell signals and how can I protect my device?
Attempted radio interference is illegal and rare on 2.4 GHz. You can mount the doorbell with security screws, enable tamper alerts in the Ring app and set up Ring Alarm motion triggers.
How do I replace or upgrade my Ring door lock?
To replace a Ring smart lock, remove the interior assembly, install the new compatible deadbolt, connect the Z-Wave or Wi-Fi module, secure exterior housing, pair with the Ring app and test opening and locking.
What is the best Ring-compatible smart lock?
Starlight Smart Locks by Starlight Hardware top the list thanks to tri-protocol support (Z-Wave, Zigbee, Wi-Fi), fast one-tap routines, CE/FCC certification and a streamlined 15-minute installation template.
Where can I find the Ring door lock manual?
The Ring door lock manual is available in the Ring app under Device Settings > Help & Support. You can also download a PDF from ring.com/support/manuals.
Does the Ring door lock include a camera?
The Ring door lock doesn’t include a camera. You can pair it with a Ring Video Doorbell for live HD video and motion detection right at your entryway.